WATEC 2017
WATEC 2017
 
New!!! ProfiHub / ProfiSwitch - Multi channel PROFIBUS repeaters

 
Instrumetrics Industrial Control Ltd – 20 years representative of Endress+Hauser in Israel

 
NEW - A stainless performance Liquiphant in the Oil & Gas industry

 
New on site!! Movies Category (On Tech Info)

 
New - Energy Management System

 
New - Combricks PA Link

 
Differential Pressure Transmitters - improved models - FMD71 & FMD72

 
Mobile Access to your Device Information !!!

 

pH / ORP Meas

Home >> Products >> Liquid Analysis >> Sensors / Electrodes >> pH / ORP Meas

pH

 
Orbisint CPS11D
Orbisint CPS11D is a digital pH electrode with Memosens technology for standard applications in process and environment technology. It is designed with a dirt-repellent PTFE diaphragm and a built-in temperature sensor. With ATEX, FM and CSA approval it is made for application in hazardous areas.
Ceraliquid CPS41D
Ceraliquid CPS41D is a digital pH electrode with Memosens technology. It is equipped with a ceramic diaphragm, liquid KCl electrolyte and a built-in temperature sensor. With ATEX, FM and CSA approval the CPS41D is suitable for application in hazardous areas.
 

 
Ceragel CPS71D
The Ceragel CPS71D is a digital pH electrode with Memosens technology, which is designed for process technology, hygienic and sterile applications. It is equipped with a double junction reference system, integrated bridge electrolyte and a built-in temperature sensor.

 
Orbipac CPF81D
Orbipac CPF81D is a compact pH electrode with Memosens technology for flow or immersion installation in industrial water and wastewater.




 

 
Orbipore CPS91D
Orbipore CPS91D is a digital pH electrode with Memosens technology. It is designed with an open aperture for heavily soiled media and a built-in temperature sensor. The open aperture allows the use of the electrode in media with a high solids content, in suspensions/emulsions as well as in precipitation reactions where the diaphgram would otherwise block in a short time.
Tophit CPS491D
The CPS491D is a digital ISFET sensor (ion-sensitive fieldeffect transistor) with Memosens technology for long-term stable pH measurement in media with high dirt loads. The non-glass sensors in the Tophit line can even be installed overhead. They are characterized by their extremely stable PEEK shaft and can be used in media with high organic solvent parts.

 
Purisys CPF201
Purisys CPF201 is the compact pH electrode for measurement in pure and ultrapure water.






 
ORP

 
Orbisint CPS12D
Orbisint CPS12D is a digital ORP electrode with Memosens technology and reference electrode. Its dirt-repellent PTFE diaphragm is suitable for standard applications in process and environmental technology. With ATEX, FM and CSA approval the electrode is made for application in hazardous areas.
Ceraliquid CPS42D
Ceraliquid CPS42D is a digital ORP and reference electrode with Memosens technology. It contains a ceramic diaphragm and liquid KCl electrolyte. With ATEX, FM and CSA approval the CPS42D is suitable for application in hazardous areas.


 

 
Ceragel CPS72D
Ceragel CPS72D is a digital ORP electrode with Memosens technology. It is equipped with a double junction reference system and integrated bridge electrolyte. The electrode is designed for process technology, hygienic and sterile applications.

 
Orbipac CPF82D
Orbipac CPF82D is a compact ORP electrode with Memosens technology for flow or immersion installation in industrial water and wastewater.




 

 
Orbipore CPS92D
Orbipore CPS92D is an ORP electrode with digital Memosens technology. It is designed with an open aperture for heavily soiled media.
   
Additional Categories:  pH Sensors / Electrodes | ORP Sensors / Electrodes |
 
     
 

Instrumetrics Industrial Control Ltd
Tel: +972-9-8357090   |   Fax: +972-9-8350619   |  Email: info@instrumetrics-ic.co.il